dimensions in inches and (millimeters) to-220ab features plastic material used carries underwriters laboratory classifications 94v-0 metal silicon junction, majority carrier c onduction low power loss, high efficiency high current capability, low forward volt age drop high surge capab ility for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications guardring for overvoltage protection high temperature soldering guaranteed: 260 o c/10 seconds,0.25?(6.35mm)from case mechanical data cases: jedec to-220ab molded plastic polarity: as marked mounting position: any mounting torque: 5 in. - lbs. max weight: 2.24 grams maximum ratings and electrical characteristics rating at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol mbr 3035 ct mbr 3045 ct mbr 3050 ct mbr 3060 ct mbr 3090 ct mbr 30100 ct mbr 30150 ct units maximum recurrent peak reverse voltage v rrm 35 45 50 60 90 100 150 v maximum rms voltage v rms 24 31 35 42 63 70 105 v maximum dc blocking voltage v dc 35 45 50 60 90 100 150 v maximum average forward rectified current at t c =130 o c i (av) 30 a peak repetitive forward current (rated v r , square wave, 20khz) at tc=130 o c i frm 30 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 200 a peak repetitive reverse surge current (note 1) i rrm 1.0 0.5 a maximum instantaneous forward voltage at (note 2) i f =15a, tc=25 o c i f =15a, tc=125 o c i f =30a, tc=25 o c i f =30a, tc=125 o c v f 0.7 0.6 0.82 0.73 0.77 0.67 0.84 0.70 0.94 0.82 0.95 0.92 1.02 0.98 v maximum instantaneous reverse current @ tc=25 o c at r ated dc blocking voltage per leg @ tc=125 o c (note 2) i r 0.2 15 0.2 10 0.2 7.5 0.1 5.0 ma ma voltage rate of change, (rated v r ) dv/dt 1,000 v/us typical junction capacitance cj 600 460 320 pf m aximum t hermal r esistance p er l eg ( n ote 3) r jc 1.0 1.5 o c/w operating junction temperature range t j -65 to +150 o c storage temperature range t stg -65 to +175 o c notes: 1. 2.0us pulse width, f=1.0 khz 2. pulse test: 300us pulse width, 1% duty cycle 3. thermal resistance from junction to case per leg, with heatsink size (4?x6?x0.25?) al-plate mbr3035ct-MBR30150CT 30.0amp. schottky barrier rectifiers http://www.luguang.cn mail:lge@luguang.cn
mbr3035ct-mbr3045ct mbr3050ct & mbr30100ct tj=125 c 0 tj=25 c 0 tj=75 c 0 ratings and characteristic curves (mbr3035ct thru MBR30150CT) fig.2- maximum non-repetitive forward surge current per leg ro fk aep tn er ru c eg r u s d raw )a( . 1 001 01 50 100 0 150 250 200 300 number of cycles at 60hz tj=tj max. 8.3ms single half sine wave jedec method fig.4- typical reverse characteristics per leg instantaneous reverse current .(ma) 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage. (%) 0.001 0.1 0.01 1 10 50 fig.6- typical transient thermal impedance per leg transient thermal impedance. ( c/w) o 1 0.01 0.1 10 100 0.1 10.0 1 100 t, pulse duration. (sec) fig.5- typical junction capacitance per leg junction capacitance.(pf) 0.1 1 10 100 100 1000 reverse voltage. (v) tj=25 c f=1.0mhz vsig=50mvp-p 0 mbr3035ct mbr3045ct mbr3050ct & mbr3060ct mbr3090ct-MBR30150CT & fig.1- forward current derating curve average forward current. (a) 0 50 100 150 0 6 12 18 24 30 case temperature. ( c) o resistive or inductive load 800 600 400 200 50 0 fig.3- typical instantaneous forward characteristics per leg if-instantaneous forward current. (a) forward voltage. (v) 0.6 0.8 1.00.9 0.7 0.50.40.30.2 0.1 0 1.0 0.5 3.0 10 50 5.0 20 mbr3090ct & mbr30100ct mbr3035ct & mbr3045ct mbr3050ct & mbr3060ct MBR30150CT mbr3035ct-MBR30150CT 30.0amp. schottky barrier rectifiers http://www.luguang.cn mail:lge@luguang.cn
|
